Oral B, physical
$34.95 – $54.95
Custom 3D printed electric toothbrush holder with slots for 3 Oral B chargers. Organize and hide your charger cords and free up valuable space. Declutter your bathroom counter while still charging your toothbrushes. This toothbrush holder is mounted by replacing your existing outlet plate with a custom design and printed plate that is provided with your purchase. This innovation looks sleek, clean and modern!
Color: White
Product Dimensions: 6.5″ x 4″ x 8.75″
Base: Oral B electric toothbrush triple slot charging base holder with custom wall plate. (Chargers and toothbrushes are not included) To ensure fit, please confirm that you have the correct Oral B charger base. (see picture)
Easy to install:
1. Remove existing wall plate and set aside the screws.
2. Attach new wall plate to toothbrush holder by sliding it into the slots on the bottom of the base. Attach wall plate with the base attached to the wall using existing screws.
3. Slide top off of base.
4. Feed the plug and desired amount of cord slack through the base hole.
5. Wind remaining cord around itself in a spiral and secure the cord tightly in the middle with a twist tie or rubber band. (see picture) Make your beginning winding loop about 3 inches
long and it should fit in the holder well with plenty of head room to slide on the top so it sits flush.
6. Repeat with 2nd,3rd and 4th charger cords if it pertains. Lay cords as flat and neat as possible.
7. Replace top by sliding it back into place to hide excess cord. Place toothbrush chargers (not included) in the cutouts. Adjust cords as needed for the charger to sit flat.
Plate style:
1. 2 Gang NEMA
2. 2 Gang GFCI
3. W-1 Gang NEMA
4. W-1 Gang GFCI
5. *CUSTOM PLATE* If you do not see what you need for your outlet wall plate please message me before ordering with a picture of your current outlet wall plate. I should be able to
design something that works. (Please note that turnaround on custom wall plates will take 3-5 extra business day due to custom plates not being stocked)
SKU: 1375801798Categories: Oral B, physicalTags: 3 docking station, bathroom storage, cord hider box, Counter space save, custom 3d printed, declutter wall decor, Electric brush stand, free up room, management container, mounted outlet cover, Oral b charger base, organizer shelf, switch plate design
- Description
- Additional information
- Reviews (0)
Custom 3D printed electric toothbrush holder with slots for 3 Oral B chargers. Organize and hide your charger cords and free up valuable space. Declutter your bathroom counter while still charging your toothbrushes. This toothbrush holder is mounted by replacing your existing outlet plate with a custom design and printed plate that is provided with your purchase. This innovation looks sleek, clean and modern!
Color: White
Product Dimensions: 6.5″ x 4″ x 8.75″
Base: Oral B electric toothbrush triple slot charging base holder with custom wall plate. (Chargers and toothbrushes are not included) To ensure fit, please confirm that you have the correct Oral B charger base. (see picture)
Easy to install:
1. Remove existing wall plate and set aside the screws.
2. Attach new wall plate to toothbrush holder by sliding it into the slots on the bottom of the base. Attach wall plate with the base attached to the wall using existing screws.
3. Slide top off of base.
4. Feed the plug and desired amount of cord slack through the base hole.
5. Wind remaining cord around itself in a spiral and secure the cord tightly in the middle with a twist tie or rubber band. (see picture) Make your beginning winding loop about 3 inches
long and it should fit in the holder well with plenty of head room to slide on the top so it sits flush.
6. Repeat with 2nd,3rd and 4th charger cords if it pertains. Lay cords as flat and neat as possible.
7. Replace top by sliding it back into place to hide excess cord. Place toothbrush chargers (not included) in the cutouts. Adjust cords as needed for the charger to sit flat.
Plate style:
1. 2 Gang NEMA
2. 2 Gang GFCI
3. W-1 Gang NEMA
4. W-1 Gang GFCI
5. *CUSTOM PLATE* If you do not see what you need for your outlet wall plate please message me before ordering with a picture of your current outlet wall plate. I should be able to
design something that works. (Please note that turnaround on custom wall plates will take 3-5 extra business day due to custom plates not being stocked)
| Weight | 12.0 kg |
|---|---|
| Dimensions | 11.0 × 8.0 × 2.0 cm |
| Primary color | White |
Reviews
There are no reviews yet.
Be the first to review “Electric Toothbrush Holder, Oral B, 3 Charging Slots, Organizer, Outlet Wall Mount”
Related products
Select options
physical
Replacement Lid – 2 PlaceRated 0 out of 5
$5.95Select optionsThis product has multiple variants. The options may be chosen on the product page
Select options
physical
Outlet shelf for electronics with concealed cable management organizing baseRated 0 out of 5
$29.95 – $49.95Select optionsThis product has multiple variants. The options may be chosen on the product page
Select options
Philips Sonicare
Electric Toothbrush Holder, Philips Sonicare, 3 Charging Slots, Organizer, Outlet Wall MountRated 0 out of 5
$34.95 – $54.95Select optionsThis product has multiple variants. The options may be chosen on the product page
Select options
Philips Sonicare
Electric Toothbrush Holder, Philips Sonicare, 1 Charging Slot, Organizer, Outlet Wall MountRated 0 out of 5
$19.95 – $39.95Select optionsThis product has multiple variants. The options may be chosen on the product page
